REQUEST A QUOTE 0481 870 060

Whole-house rendering on the Gold Coast


Whole-house rendering on the Gold Coast

We render complete homes, existing and new, in cement render or acrylic render systems, with one crew and one system from first coat to finish. Most of our work is for homeowners: 1970s and 1980s brick homes being brought up to date, older rendered houses that need a fresh, even finish, and extensions or second storeys that need to match the rest of the house. We also render new builds.

Gold Coast Rendering holds QBCC licence 15462733, including the Plastering Solid class that covers rendering work. Every job is backed by a 10-year written workmanship and manufacturer warranty.

Rendered house and rendered fence pillars beside a timber entry path in Benowa

Re-rendering an existing home

A full re-render replaces a dated or patchy exterior with one consistent finish across the whole house. It suits face brick and block homes that you want to modernise, and older rendered homes where the render has aged unevenly.

Before new render goes on, loose and drummy (hollow-sounding) render is removed and repaired back to sound material, and the cause of any cracking, such as building movement, a missing control joint or water getting behind the render, is dealt with so it does not come straight back. Re-rendering the whole house avoids the patchwork look of repairs that don’t match the rest of the wall.

We do still take on smaller repair jobs, but rendering the whole house is where we can make the biggest difference.

Extensions and second storeys

When you add a room or a second storey, the new walls are often built from different materials to the original house: brick or block downstairs, and lightweight boards, Hebel/AAC panels or EPS foam upstairs. We render the new walls in the right system for each substrate and can re-render the existing house at the same time, so the whole home finishes in one consistent look rather than an obvious old part and new part. See acrylic render over lightweight substrates below for how lightweight walls are rendered.

New homes

We also render new homes, working with owner-builders and builders. Send the plans and your build stage and we will quote the render for the whole exterior, then fit our work in with the build program once the walls are up.

Render systems and finishes

Cement render. The traditional sand, cement and lime mix, applied in one or more coats and finished by sponge or float. It suits sound brick and block and gives a hard, durable finish.

Acrylic render systems. Renders with acrylic binders that add flexibility and adhesion. They are the standard choice over lightweight boards, Hebel/AAC panels and EPS foam, where a mesh-reinforced base coat and a compatible finish coat work together as one system.

Finishes. The final look depends on how the top coat is worked: a fine sponge finish, a smoother float finish or a deliberate texture. If you want to match an existing wall, a photo of it helps us work out the closest finish.

Acrylic render over lightweight boards, Hebel/AAC panels and EPS foam

Extensions, upper storeys and feature walls are often built from lightweight boards, Hebel/AAC panels or EPS foam rather than brick or block. These substrates take an acrylic render system rather than a traditional cement render, because the render needs to flex slightly with the substrate and bond to a surface that behaves differently from masonry. Our part of the job starts once the boards or panels are in place.

  1. Check the substrate. The surface needs to be flush, secure and clean, with joints, corners and openings ready to take render.
  2. Base coat and mesh. A base coat with reinforcing mesh goes on first, with extra attention at joints, corners and around windows and doors.
  3. Finish coat. The finish render or texture coat goes on in the finish you have chosen.

The base coat, mesh and finish coat are kept to one compatible system and applied to the render manufacturer’s requirements. Mixing products from different systems is one of the most common causes of cracking at joints, so we stick to the one system from the first coat to the last.

Surfaces we render

  • Brick and block houses, new and old – the most common surfaces for render. They need to be clean and sound, with any efflorescence (white powdery deposits) dealt with first.
  • Lightweight boards, Hebel/AAC panels and EPS foam – these take an acrylic render system with reinforcing mesh and the base coats specified for that substrate. See acrylic render over lightweight substrates above.
  • Existing render – can often be re-rendered or coated once loose and drummy areas are removed and repaired.
  • Front fences, entry walls and garden beds – rendered along with the house so everything matches.

Preparation makes the finish

Most render problems trace back to preparation. Before any render goes on, walls are cleaned of dirt, mould and loose material, and the surface is checked for moisture and movement. Corners and edges are set with beads so they stay straight and protected, and control joints in the building are carried through the render rather than covered over, so the wall can move without cracking in random places.

Windows, doors, paving and gardens are protected before work starts, and the site is cleaned up at the end of each stage.

Get a quote for your house

All of our rendering work is covered by our 10-year written workmanship and manufacturer warranty. For a free quote, call 0481 870 060 or send an enquiry with plans or a wide photo of each side of the house, or see indicative ranges in our pricing guide.

Where we work

We render homes in every suburb of the City of Gold Coast, including:

Gold Coast suburbs we service (80)
  • Advancetown
  • Alberton
  • Arundel
  • Ashmore
  • Austinville
  • Benowa
  • Biggera Waters
  • Bilinga
  • Bonogin
  • Broadbeach
  • Broadbeach Waters
  • Bundall
  • Burleigh Heads
  • Burleigh Waters
  • Carrara
  • Cedar Creek
  • Clagiraba
  • Clear Island Waters
  • Coolangatta
  • Coombabah
  • Coomera
  • Currumbin
  • Currumbin Valley
  • Currumbin Waters
  • Elanora
  • Gaven
  • Gilberton
  • Gilston
  • Guanaba
  • Helensvale
  • Highland Park
  • Hollywell
  • Hope Island
  • Jacobs Well
  • Kingsholme
  • Labrador
  • Lower Beechmont
  • Luscombe
  • Main Beach
  • Maudsland
  • Mermaid Beach
  • Mermaid Waters
  • Merrimac
  • Miami
  • Molendinar
  • Mount Nathan
  • Mudgeeraba
  • Natural Bridge
  • Nerang
  • Neranwood
  • Norwell
  • Numinbah Valley
  • Ormeau
  • Ormeau Hills
  • Oxenford
  • Pacific Pines
  • Palm Beach
  • Paradise Point
  • Parkwood
  • Pimpama
  • Reedy Creek
  • Robina
  • Runaway Bay
  • South Stradbroke
  • Southport
  • Springbrook
  • Stapylton
  • Steiglitz
  • Surfers Paradise
  • Tallai
  • Tallebudgera
  • Tallebudgera Valley
  • Tugun
  • Upper Coomera
  • Varsity Lakes
  • Willow Vale
  • Wongawallan
  • Woongoolba
  • Worongary
  • Yatala

Questions? See the frequently asked questions or our other services.

Ready to talk about your project?

Call 0481 870 060 or send your details for a free quote. Licensed and insured (QBCC 15462733), with a 10-year written workmanship and manufacturer warranty.

Request a quote

Call 0481 870 060

© 2026 JRAC GROUP PTY LTD trading as Gold Coast Rendering. All rights reserved.

Scroll to top